|
Megol Schmierfett KF2G-20

Seawater resistant lubricating grease with outstanding rust- and corrosion protection characteristics.
Specially suited for lubrication and corrosion protection of ship-parts which are exposed to seawater,
and for industry, automobile, homeworker, and household. Service range from -20 ¡ãC to +100 ¡ãC.
Properties:
- The grease contains an adhesive improver and specially selected active substances against
corrosion, oxidation and rust.
- Waterproove and adhesive capacity were checked in a spezial test based on saltwater.
- Corrosion protection and ageing are adopted to special testing procedure including artificial
sunlight and salty rain.
Application:
- Marine lubricating grease, which especially protects the outside layer of the boat which are in direct
seawater and salty air contact from rust and corrosion.
- Water-repellent protection grease for industrial and agricultural use. e.g. machines, pieces of
metal, joints, wired cablesz.B. Maschinen, Metallteile, Gelenke, Drahtseile, die feuchter Luft,
nassen Grubenverhltnissen oder ¨¹blichen Umwelteinfl¨¹ssen ausgesetzt sind.
- Schmierung von thermisch und mechanisch normal beanspruchten Gleit- und Wlzlagern,
F¨¹hrungen, Steuerhebeln, Wasserpumpen.
- Schmierung und Protektion rostgefhrdeter Teile an Kraftfahrzeugen (Motorraum, T¨¹ren,
Kofferraum, Schweinhte, Hohlrume). Bei schon vorhandenem Rost ist dieser vor der
Fettanwendung zu entfernen.
- Schmier- und Rostschutzfett f¨¹r Heimwerker, Haus und Garten.
Einsatzbereich von - 20 ¡ãC bis + 100 ¡ãC
Characteristic data |
¡¡ |
¡¡ |
approx. values |
Appearance and properties |
¡¡ |
¡¡ |
yellow-green, very sticky supple, soft |
Saponification type |
¡¡ |
¡¡ |
Ca |
baseoil |
¡¡ |
¡¡ |
¡¡ |
viscosity at 40 ¡ãC |
DIN 51562 |
mm2/s |
900 |
Drip point |
DIN ISO 2176 |
¡æ |
145 |
Consistency class |
DIN 51818 |
¡¡ |
2 |
Fulling penetration |
DIN ISO 2137 |
0.1mm |
275-295 |
Fulling stability |
DIN ISO 2137 |
¡¡ |
¡¡ |
Difference after 5.000 u. 60 DH |
¡¡ |
0.1mm |
<10 |
Difference after 100.000 u. 60 DH |
¡¡ |
0.1mm |
<25 |
Property against water |
DIN 51807 Teil 1 |
¡¡ |
1-90 |
Ant-corrosion properties |
¡¡ |
¡¡ |
¡¡ |
Emcor-method |
DIN 51802 |
Corr.-degr. |
0 |
Copper strip test |
DIN 51811 |
Corr.-degr. |
1-100 |
Watercontent |
DIN ISO 3733 |
g/100g |
©‚0. 2 |
il seperation after 7 days And + 40 ¡ãC |
DIN 51817 |
g/100g |
1.6 |
Ashes, oxide |
DIN EN 7 |
g/100g |
1.8 |
Oxidation fall after 100 h at + 99 ¡ãC |
DIN 51808 |
bar |
<0.5 |
|
|